Inverter Model | Power (kW) G/P | Current (A) | Dimension (mm) | Figure | |||||
H | H1 | W | W1 | D | d | ||||
ZVF300-G0R4S2MD | 0.4 | 2.4 | 185 | 175 | 118 | 108 | 170 | 4 | Fig.1 |
ZVF300-G0R7S2MD | 0.75 | 7.5 | |||||||
ZVF300-G1R5S2MD | 1.5 | 7.0 | 185 | 175 | 118 | 108 | 190 | 4 | |
ZVF300-G2R2S2MD | 2.2 | 10 |
Item | Item Description | |
Input | Rated voltage& Frequency | Single /Three phase 220VAC . Three phase 380V.50Hz/60Hz |
Allowable Voltage range | Voltage fluctuate range:-20%~+20% Voltage unbalance rate:<3%;Frequency fluctuation:≤5% | |
Output | Rated voltage | three phase 0~ input AC voltage |
Frequency | 0.00~600.00Hz | |
Overload capacity | Type G:150% 1minute,180% 1 second,200% transient protection Type P:120% 1minute,150% 1 second,180% transient protection | |
Control Function | Modulation mode | Optimal space voltage vector PWM modulation |
Control mode | Sensorless vector control (SVC), V/F control . Torque control | |
Frequency accuracy | Digital setting::Max. Frequency×±0.01% Analog setting:Max. Frequency×±0.2% | |
Frequency resolution | Digital setting :0.01HZ; Analog setting :Max. Frequency x0.1%. | |
Starting frequency | 0.00~10.00Hz | |
Torque lift | Automatic torque lift: To lift the torque automatically according to the output current. Manual torque lift, Range: 0.1_30.0% | |
Slip compensation | Setting range:0~150%,The inverter output frequency can be auto-regulated within this range according to the motor load, so as to reduce the speed variation of the motor due to load fluctuation. | |
Acceleration/deceleration time | Minutes/Seconds can be selected as time unit .0.1~3600 can be set in sequence . | |
Carrier frequency | 1.0~15.0KHz | |
Jog function | Jog frequency range:0.01~600.00Hz, Jog acceleration /deceleration time 0.1~3600.0 can be set. | |
V/F curve | 1:linear curve;2:quadratic;3:user defined V/F curve |
Ambient | Place to be used | Indoor location free from direct exposure to sun light, high humidity or dew condensation, high levels of dust, corrosive gas, explosive gas, inflammable gas, oil mist, salt and etc |
Altitude | Below 1000 M | |
Ambient Temperature | -10 C to +45 C (Bare Machine: -10 C to+50 C) | |
Humidity | 20%-90% RH without dew condensation | |
Vibration | <0.5G | |
Storage temperature | -20~+60C | |
Structure | Protection class | IP20 |
Cooling mode | Forced air cooling | |
Installation mode | Wall mounted or floor-type actuator |