Model NO. | QY50KD |
Engine Rated Power | 276/2200kw/(R/Min) |
Engine Rated Torque | 1500/1300-1600n.M/(R/Min) |
Max. Travel Speed | 85km/H |
Min. Turning Diameter | 24m |
Min. Ground Clearance | 327mm |
Max. Grade Ability | 42% |
Specification | 13930*2780*3630mm |
Description | Unit | Parameter | |
Overall length | mm | 13930 | |
Overall width | mm | 2780 | |
Overall Height | mm | 3630 | |
Axle base | 1st ,2nd axle | mm | 1470 |
2nd ,3rd axle | mm | 4300 | |
3rd ,4th axle | mm | 1350 | |
Wheel Base | mm | 2304+2075 | |
Front overhang/rear overhang | mm | 2389/2064 or 2376/2064 | |
Front extension/rear extension | mm | 2131/226 or 2144/226 | |
Total vehicle mass in travel configuration | kg | 42200 | |
Axle load | Front axle | kg | 16200 |
Rear axle | kg | 26000 | |
Engine rated power | kw/(r/min) | 276/2200 | |
Engine rated torque | N.m/(r/min) | 1500/1300-1600 | |
Max. travel speed | km/h | 85 | |
Min. steady travel speed | km/h | 2~3 | |
Min. turning diameter | m | 24 | |
Min. ground clearance | mm | 327 | |
Max. grade ability | % | 42 | |
Approach angle | ° | 19 | |
Departure angle | ° | 15 | |
Braking distance (at 30 km/h, full load ) | m | ≤10 | |
Oil consumption per 100km | L | 40 | |
Exterior noise level during acceleration traveling | dB (A) | ≤88 | |
Noise level at seated position | dB (A) | ≤90 |
1. What is your advantage?
Compared with other trading companies, Telda is armed with experience that more than 10 years, and various sources of products that can satisfy different requirements about the whole machine and spare parts. In addition, the reply speed is faster than checking with the factory directly, we have 7*24 assistants to provide customers with any help including quoting and after-sale service, therefore you do not need to worry about an emergency situation.
2. How long does it usually take to deliver?
For a normal model, we usually get the machine and spare parts ready within 4 days. For special specifications, we have more sources to buy for you and provide products at a higher speed.
3. Which kind of payment term do you accept?
We usually quote FOB, CIF, CFR prices and use T/T, cash against the document, D/P most often.