| Sensor Capability | |||
| Image Sensor | 640*480 CMOS | ||
| A cquisition speed | 30fps | ||
| Field of View | Diagonal 58°,Horizontal 42°,Vertical 36° | ||
| Scan Capability | |||
| Scan Precision | 2D≥5mil,1D≥4mil | ||
| Depth of Field | Testing Condition | Depth of Field | |
| Code 128 10mil 18bytes Paper Code | 60~310mm | ||
| Code 128 18bytes phone code | 70~260mm | ||
| QR 10mil 160bytes paper code | 30~120mm | ||
| DM 15mil 100bytes paper code | 30~200mm | ||
| QR 18bytes phone code | 50~460mm | ||
| Scan Angle | Roll 360°,Pitch ± 55°,Skew ± 55° | ||
| Symbologies | 2D Code: QR,Data Matrix,PDF417,hanxin Code,Dot code etc | ||
|
1D Code:
UPC-A, UPC-E, EAN-8, EAN-13, ISBN, Code 128, GS1 128,
ISBT 128, Code 39, Code 93,Code 11, Interleaved 2 of 5, Industrial 2 of 5,Matrix 2 of 5, Standard 25, P lessey, MSI P lessey , GS1 Data Bar etc |
|||
| Minimal Print Contrast | 20% | ||
| LED | |||
| Illumination | White LED | ||
| Aiming | Red LED (625±10nm) | ||
| Physical Parameter | |||
| Dimension | (W * D * H): 28mm*12mm*14.55mm | ||
| Weight | 3g | ||
| Notification | Beep, LED indicator | ||
| Interface | |||
| Interface | UART,USB-COM,USB KBW (support GBK,GB2312,UTF) | ||
| Cable | Flexible Flat Cable (FFC) | ||
| Scan Mode | Trigger Mode/Command Mode/Sense Mode | ||
| Install Hole | PB1.7mm flat tail self-tapping screws are used for each of the two screw holes on the front and back sides. Maximum depth of locking is 3.5mm | ||
| Environmental | |||
| Operating Temperature | -30ºC ~ 70ºC | ||
| Storage Temperature | -40ºC ~ 80ºC | ||
| Humidity | 5% ~ 95%(non-condensing) | ||
| Ambient Light | Max.100,000 Lux | ||
| Electric | |||
| Input Voltage | 3.3V±0.3V | ||
| Curren t@ 3.3VDC Operating | <190mA | ||
| Curren t@ 3.3VDC Standby | <10mA | ||
| Certifications | |||
| Certificates | CE,RoHs, IEC62471 | ||
| Warranty | 2 Years | ||
| NO | PIN | Signal Type | Description |
| 1 | NC | Empty PIN | |
| 2 | VDD | Power | 3.3V Power Supply |
| 3 | GND | Power | GND |
| 4 | RX | Input | UART Receive,TTL Level |
| 5 | TX | Output | UART Send,TTL Level |
| 6 | D- | Bi-directional Difference | USB D- Signal |
| 7 | D+ | Bi-directional Difference | USB D+ Signal |
| 8 | NC | Empty PIN | |
| 9 | BUZ | Output |
Beeper Signal Outputs (High Level is Valid),
Need External Drive |
| 10 | LED | Output | LED Signal Outputs (High Level is Valid), Need External Drive |
| 11 | NC | Empty PIN | |
| 12 | nTRIG | Input | Trigger Signal Inputs, Low Level is Valid |